Endoscopic operations (or keyhole surgery) are much less stressful for the patient and give a better cosmetic result than 'open' surgery. But on the other hand, it is very difficult for the surgeon to carry out keyhole surgery. This is due to the disruption of hand-eye coordination, as the surgeon has to operate via a 2D image on a monitor. Moreover, the video camera has to be operated by an assistant and the work must be done using long and rigid instruments that provide little freedom of movement. The existing robot systems that have been developed to solve the aforementioned problems are complex, expensive and do not provide the required (force) feedback to the surgeon.
The aim of Joris Jaspers' research project was to develop simple mechanical alternatives to these complex robotic systems, and also to test them. Jaspers is a doctoral student at the department of Mechanical Engineering of Delft University of Technology, but the greater part of his work is conducted at the Academic Medical Centre (AMC) in Amsterdam, where in recent years he has developed and evaluated two instruments in collaboration with surgeons.
The first instrument is a camera and instrument holder. Using this mechanical arm the surgeon can operate the camera himself (with one hand), thus allowing him to conduct the operation by himself without a (camera) assistant. A test showed that this enabled 'solo surgery' and that it even brought advantages in comparison to surgery using an assistant.
The second instrument developed by Jaspers is a mechanical manipulator for operating the various instruments u
'"/>
Contact: Frank Nuijens
f.w.nuijens@tudelft.nl
31-15-278-4259
Delft University of Technology
21-Mar-2006